The conditioner is used for pre-treatment before further burnishing steps. The treatment has a beneficial effect on the subsequent blackening, especially on steels containing chrome, which is reflected in a better result.
Thoroughly clean and degrease the object to be coated (do not touch with hands), all deposits must be removed. Now the object is placed in the conditioner for 3-10 minutes, gas bubbles are formed. After conditioning, rinse briefly with water.
Now the object can be burnished with the desired burnishing solution.
This pre-treatment can be used for all burnishing operations of Dr. Galva.
Marking of the mixture:
(contains sulphuric acid, potassium hydrogen difluoride)
Signal word: Danger
May be corrosive to metals.
Causes severe skin burns and severe eye damage.
Do not breathe dust/fume/gas/mist/vapour/aerosol.
Wear protective gloves/protective clothing/eye protection/face protection.
IF IN CONTACT WITH SKIN (or hair): Remove all contaminated clothing immediately. Wash skin with water or shower.
IN CONTACT WITH EYES: Rinse gently with water for several minutes. Remove any contact lenses if possible. Rinse further.
Dispose of contents/container hazardous waste.